Kent RO Installation in New Delhi for Flats, Kothis, Offices

Kent RO installation in New Delhi starts at ₹499. Delhi homes get a mix of DJB supply and borewell water with very different TDS, so the fitter measures it and sets the unit to match.

Buying a new Kent RO water purifier is a smart investment for your family's health. But the real performance of your purifier depends on one critical step — proper installation. A wrongly installed RO system can waste water, leak, deliver poor TDS, damage internal parts, and even void your manufacturer warranty. That is why thousands of customers in New Delhi trust OnDoors for professional kent ro installation in new delhi .

Our certified RO installers carry every required tool — wall drill, pipe cutter, flaring kit, TDS meter, pressure gauge, food-grade tape, and original Kent fittings. From wall mounting and inlet pipe routing to drain connection, electrical setup, system flushing, and TDS testing — every step is handled with precision. We do not believe in shortcuts. Every Kent RO installation we deliver in New Delhi is built to last for years.

If you have just bought a new Kent RO purifier from a showroom or online store, do not rely on random local plumbers or untrained handymen. They often skip the flushing step, use cheap pipes, ignore inlet pressure, or wire the SMPS incorrectly — all of which damage your purifier within months. Choose certified Kent RO installers in New Delhi for a flawless first-time setup, professional documentation, and complete peace of mind.

Our Kent RO Installation Services in New Delhi

We provide professional installation for every type of Kent water purifier — domestic and commercial. Each installation is customised to your kitchen layout, water source, inlet pressure, and electrical setup.

Why Proper Kent RO Installation Matters

Many homeowners in New Delhi unknowingly damage their expensive Kent RO systems by relying on cheap, untrained installers. Here is why correct installation is critical:

• Better Water Quality: Correct flushing and filter alignment ensures the purest water output from day one.
• Maximum Membrane Lifespan: Proper inlet pressure and pre-filter use protect the costly RO membrane from premature damage.
• Zero Leakage: Tight, food-grade fittings prevent water leaks and water damage to your kitchen cabinets.
• Lower Water Wastage: Optimised drain ratio reduces reject water — saving thousands of litres every year.
• Warranty Protection: Kent warranty stays intact only when installation is done by trained, certified professionals.
• Electrical Safety: Proper SMPS connection prevents short circuits, board damage, and fire risks.

Why Choose OnDoors for Kent RO Installation in New Delhi

With dozens of plumbers and unverified mechanics in New Delhi, what makes OnDoors the most trusted Kent RO installation service in New Delhi?

New Delhi: Kent RO installation and AMC rates

These are starting prices for Kent units in New Delhi. Parts are extra, and the technician quotes the exact amount before any work begins.

Our Step-by-Step Kent RO Installation Process in New Delhi

1. Booking: Submit your request via call, WhatsApp, or our website. The nearest installer in New Delhi is allocated.
2. Site Inspection: The technician inspects your kitchen layout, water inlet, drain point, and power socket location.
3. Mounting: Heavy-duty drill machines are used to mount the Kent RO unit on a strong wall or under-sink position.
4. Plumbing & Electrical: Inlet, drain, and dispense pipes are connected. SMPS adapter is wired safely.
5. Flushing & TDS Test: The system is flushed for 15-20 minutes and TDS is tested before and after to confirm performance.
6. Demo & Cleanup: The technician shows you how to use the unit, hands you the warranty card, and cleans up the work area.

Fitting a Kent RO unit in New Delhi: mounting, flush and TDS check

A flat in Dwarka may run on DJB water with moderate TDS, while a house in Lajpat Nagar relies on a borewell with several hundred more.

The same Kent needs different set-up in each case. Rohini and Janakpuri kothis often have rooftop tanks with decent pressure, but old Karol Bagh buildings may need a new tap point before mounting.

Reported for New Delhi: Delhi Jal Board said in 2019 its raw water is mainly from the Yamuna, treated by coagulation and disinfection, and claimed supplied TDS stays around 100-200 mg/L, so RO is unnecessary. This is the board's own claim. Dissolved salts like these are what an RO membrane is built to reduce, and our technician reads the TDS at your tap before setting the controller.

Source: Business Standard (PTI) (2019-05-30)

Frequently Asked Questions – Kent RO Installation in New Delhi

How much does Kent RO installation cost in New Delhi?
Standard installation starts from ₹499. Under-sink installation starts from ₹799. Commercial RO plants are quoted on-site based on capacity and plumbing complexity.

How long does Kent RO installation take?
A standard wall-mounted installation is completed in 60 to 90 minutes including flushing and TDS testing.

Will the installation void my Kent warranty?
No. Our installers follow brand-grade SOPs so your Kent manufacturer warranty stays fully intact.

Do you provide all installation accessories?
Yes — food-grade pipes, elbows, fittings, screws, and clamps are all provided. Only the unit comes from your end.

Can you install commercial Kent RO plants?
Absolutely. We install 25 LPH to 1000 LPH commercial Kent RO plants for offices, restaurants, schools, and factories across New Delhi.

What if there is a leak after installation?
Every installation comes with a 30-day warranty. If you face any leakage or fitting issue, we will fix it free of cost.

What New Delhi homes ask about Kent RO installation

How much is Kent RO installation in New Delhi?
From ₹499 for a standard wall mount; under-sink fitting or extra piping is quoted separately.

Should I get a TDS test before installing Kent RO in Delhi?
Yes. It tells the fitter whether to leave the TDS controller open, adjust it or suggest a pre-filter.

How is a Kent set up differently for DJB and borewell water?
The controller setting and filter plan change. DJB water has lower TDS, so more can pass through. Borewell water needs closer settings.

What if my Karol Bagh building has no tap point for the RO?
The fitter can add a tap point or extend the line. This is quoted before the work.

Do Rohini kothis with rooftop tanks need a booster for Kent RO?
Usually not. Rooftop tanks in kothis give steady pressure, so a booster is rarely needed. The fitter still measures pressure before mounting, and suggests a pump only if the reading is low.

Related RO services

• AO Smith RO installation in New Delhi
• Kent RO repair center, Shivamogga
• Kent RO service center in Mumbai
• RO Water Purifier Noise Problem: What Each Sound Means Now